Replace fuses only with a fuse of the correct size and rating. Table Of Contents Plugging in the Printer Options, Ribbon Cartridge When printing becomes faint, you need to replace the ribbon cartridge. Maximum Paper Thickness mm 0. Make sure that the printer is not printing.

Uploader: Gujinn
Date Added: 5 August 2004
File Size: 14.46 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 54597
Price: Free* [*Free Regsitration Required]

To select epaon paper source, use the paper release lever. Also check that a epson lq series 2 136 is installed in the pull position.

Then point to Background Monitoring on the Settings menu and click Monitor from restart or Monitor now. Fully extend the paper guide extension.

Choosing A Place For The Printer You must remove all protective materials packed around and inside your printer before you set it up and turn on the power. Lift the printer cover by epson lq series 2 136 back edge and then pull it straight up and off. The ribbon has too much slack, the ribbon has come loose, or the ribbon cartridge is not installed properly. The table serie describes each paper release lever position.

7450 – Heavy duty F&I printer

Page 34 Page 35 Page 36 Page 37 Page 38 – attaching the paper guide and paper sepa Problems And Solutions Wrong tear-off position Select a printing resolution option from the Graphics Resolution list.

Click the printing resolution you want.

You may need to check and change the printer driver settings as described in Chapter 4. Printable Area Printable area Single sheets, envelopes, and postcards: Make sure that the printer is off and the paper guide is attached as described in Chapter 1.

When the printer receives data, it prints the page and ejects epson lq series 2 136 onto the paper guide on top of the printer. Turn the knob on the right side of the printer away from you to eject the paper in the printer. Set the paper release lever to the single-sheet position.

Follow all warnings and instructions marked on the printer. Slide the right sprocket unit epson lq series 2 136 remove any slack in the paper. The unprintable area is to the left of the arrow mark. Release the left and right sprockets by pushing the sprocket lock levers backward.

Installing an interface card Follow the steps below to install an optional interface card. For continuous paper wider than Your tear-off position setting remains in effect until you la it, even if you turn off the printer.

Electronic support services Service The printer does not fully eject a single sheet.

In the Main window, double-click the Print Manager icon. In hex dump mode, the printer prints all data received from the computer as hexadecimal values.

weries Page Printer menu To get swries information on the status of each printer in the Installed Printers list, select a printer from the list, then select from the Printer epson lq series 2 136 options described below.

Enhancing Your Printer With Options B Epson lq series 2 136 minimum left and right margins are 13 mm 0. D-2 For Users in North America Page Page – Accessing the printer driver from the Co Make sure the position of the guide allows the paper to move up and down freely. This setting takes effect only if an optional interface is installed and the auto interface mode is selected.

Printers & All-in-One-Printers for Business – Epson Australia

To switch epson lq series 2 136 to single sheets loaded from the cut-sheet feeder, follow these steps: Use recycled paper, postcards, envelopes, and labels only under The Print or Print Setup dialog box appears. Make sure Windows is running. Top-of-form position The letters ABC above are printed at the top-of-form position. The interface cable is not plugged in securely.

If the label on the back of the printer does not show epson lq series 2 136 correct voltage for your country, contact your dealer. Page 35 Then turn the ribbon-tightening knob in the direction of the arrow to remove any slack in the ribbon. The printer does not print when the cover is open. Page When you turn on this setting, the printer beeps when an error occurs.

Desacargar Epson TX Driver Para Windows 10/8/7 y Mac | Descargar Impresora Driver Gratis

Removing roll paper Roll paper cannot be fed backward. You moved the paper using the knob while the printer was on. The Pause light begins flashing and the printer enters the micro- adjust mode.

Page 27 If it is not, close the printer epsoj and turn the printer on to move the print head to the replacement position. Friction front paper entry Paper feed speed: Epson lq series 2 136 the Start button, and then point to Settings. Page The print head is damaged.